300L fermenter

PRODUCTS

Get Quotation Now!

  • Jinan Qihui hot sale 300l stainless steel beer fermenter for sale

    Beer fermenters are also called CCT’s (Cylindrical Conical Tanks), FV’s (Fermentation Vessel), primary fermentor or unitanks as they are used both for fermenting and lagering.Fermenting is the process during which the yeast transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.

    Qihui stainless steel fermenters can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as overpressure and under pressure valve, CIP cleaning jet, sanitary sample valve, manhole,etc. The design of Qihui fermenters is based on our vast beer knowledge and especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the same vessel is very important. When calculating your fermenting and lagering capacity and configuration sufficient time for fermenting and lagering to produce quality beers must be taken into consideration. 

    1.Beer fermenter have top and side manway for optional
    2.Fermentation tank with high Quality spare parts.
    3.The size and cone degree of beer fermenter can be design according to client require and building
    4.Fermenting equipment will test four times 3BAR pressure, 24 hours for each test

    Fermenter Configuration:
    Design pressure 45 psi (3bar); working pressure 15psi (1bar)
    4 stainless steel legs with leveling footpads
    Interior shell: 304 stainless steel, thickness 3mm
    Exterior shell: 304 stainless steel, thickness 2mm
    Interior and exterior finish bright polish to 0.6~0.8, hygiene surface 
    60 degree cone bottom, other angles can be specified during the design process 
    Combined drain extensions and beer port in cone are standard

    25% headspace, unless a different volume is requested
    Top manway or side manway door
    Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
    Polyurethane insulation thickness 80mm for cooling jacket on side and bottom

    Fermenter System &BBT System

    Composition

    Fermentation Tank

    Material

    SUS 304 superior stainless steel

    Tank Thickness

    Interior Shell

    3mm

    Exterior Shell

    2mm

    Volume

    100-35000L (or 1-300BBL) as per design

    Necessary Configuration

    PVRV

    Insulation

    CIP Arm

    Thermowell

    Level Tube

    Sample Valve

    Discharge Arm

    Pressure Gauge

    Glycol Cooling Jacket

    Adjustable Heavy-Duty Foot Pad

    Optional Configuration

    CO2 Blow-off Arm

    Dry Hopping Port

    Carbonation Device


Message

Products Recommended