Home
About Us
Brewery Equipment
Home Nano beer brewing equipment
Micro beer brewing equipment
Commercial beer brewing equipment
Brewhouse
Fermentation tank
Brite tank
Winery equipment
Distillery equipment
Kombucha equipment
Keg filling and washing machine
Beer bottle/canning filling and capping machine
Auxiliary machine ( Miller, Auger system, control panel, chiller, beer keg)
Reference
Videos
News
Contact Us
Qihui Beer Equipment
PRODUCTS
Get Quotation Now!
Home Nano beer brewing equipment
Micro beer brewing equipment
Commercial beer brewing equipment
Brewhouse
Fermentation tank
Brite tank
Winery equipment
Distillery equipment
Kombucha equipment
Keg filling and washing machine
Beer bottle/canning filling and capping machine
Auxiliary machine ( Miller, Auger system, control panel, chiller, beer keg)
3500L craft beer brewing fermenter
Fermenter system is composed of fermenter tank, bright beer tank, yeast added tank, etc.
The traditional design of the fermenter’s cylinder and cone is double-jacket, the seal head is single-jacket, based on the original design
Fermentation is the process by which yeast converts the glucose in the wort to ethyl alcohol and carbon dioxide gas, giving both its alcohol content and its carbonation. To begin the fermentation process, the cooled wort is transferred into a fermenation vessel to which the yeast has already been added.
All tanks are made by SUS304 stainless steel, which meet domestic and international food safety and hygienic standards.
They are the cylindrical cone bottom tank, the cone are (60-90) degrees. Its externals are made by stainless steel drawing board, connected by TIG welding. Its internal components have a protective film by pickling passivation, and equipped with 80mm polyurethane insulation
The tanks with the dimple plate on the cone and the side, are cooled by glycol water or alcohol water. Automatic temperature control for each tank.
Our fermenter specifications:
Top dished head,
material SUS304, interior sand polished,
wire drawing polished plate finish, welding seams brushed
dimple type glycol jackets, PU foam insulation, thickness 100mm
side manhole, thermometer well,
rotatable CIP spray ball, CIP arm, sample valve,
mechanical pressure relief valve, pressure gauge,
glycol solenoid valves,
carbonastion stone for optional
bottom drain port and safety valve, racking arm,
associated valves and fittings
stainless steel legs, with screw assembly to adjust leg height
Function: Beer fermentation, 12-15 days | ||
1 | Total capacity | 4630L |
2 | Effective capacity | 3500L |
3 | Size | D1760*H3795mm |
4 | Weight | 655kg |
5 | Material | SUS304 |
6 | Exterior shell | 2mm |
7 | Dimple jacket | 1.5mm |
8 | Interior shell | 3mm |
9 | Insulation material | PU |
10 | Insulation thickness | 80mm |
11 | Top type | Dished head |
12 | Manhole type | Side oval manhole |
13 | Manhole size | 530x430mm |
14 | Inner cone | 60 degree |
15 | CIP pipe diameter | Φ32 |
16 | CIP ball(1) | 360º Rotating spray ball |
17 | Temperature sense | PT100 sensor |
18 | Thermowell diameter | Φ10 |
19 | Inner Polishing | 0.2-0.4micron |
20 | Design pressure | 0.2Mpa |
21 | Cooling type | Dimple cooling jacket |
22 | Cooling area | 5.6m2 |
23 | Cooling jacket inlet | G1 |
24 | Cooling jacket outlet | G1 |
25 | Pressure control | Mechanical pressure relief valve |
26 | Pressure gauge | 1pc |
27 | Hops port | Φ102 |
28 | Sample port | Φ38 |
29 | Drain outlet | Φ51 |
30 | CO2 exhaust pipe | 1pc |
31 | Safety valve (PVRV) | Φ51 |
Message
Products Recommended